Tensile testing machine for carbon fiber materials

Tensile testing machine for carbon fiber materials

The tensile testing machine for carbon fiber materials is suitable for testing and analyzing the mechanical properties of carbon fiber materials, carbon fiber materials and composites. It can be used for tensile, compression, bending, shearing, tearing, peeling, bursting, fatigue and other tests when equipped with corresponding fittings. Parameters such as test value, breaking value, elongation, tensile strength, yield strength, compressive strength, modulus of elasticity, shear strength, tear strength, peel strength can be calculated dynamically.

1. Measurement parameters:

2. Control parameters:

1. Force control rate range: 0.005~5% FS/s.

2. Force control rate accuracy:

When the speed is less than 0.05% FS/s, it is within ± 1% of the set value,

When the rate is ≥ 0.05% FS/s, it is within ± 0.5% of the set value.

3.Deformation control rate range: 0.005~5% FS/s.

4.Accuracy of deformation control rate:

When the speed is less than 0.05% FS/s, it is within ± 2% of the set value,

When the rate is ≥ 0.05% FS/s, it is within ± 0.5% of the set value.

5.Displacement control rate range: 0.001~500mm/min.

6. Displacement control rate accuracy.

When the speed is less than 0.01 mm/min, it is within ± 1% of the set value,

The rate ≥ 0.01mm/min is within ± 0.2% of the set value.

7.Control range of constant force, constant deformation and constant displacement: 0.5% - 100% FS.

8.Control accuracy of constant force, constant deformation and constant displacement:

When the set value is less than 10% FS, it is within ± 1% of the set value.

When the set value is ≥ 10% FS, it is within ± 0.1% of the set value.

3. Host parameters: