This Sansi battery powder compaction density tester Max. capacity:300KN.
Test force :
300KNCertificate :
GB, ISO, JIS, ASTM, DINAccuracy class :
0.5Measuring range of test force :
0.4%~100% F.SBattery powder compaction density tester
Function |
Sansi battery powder compaction density tester is used to test the compaction density of graphite material powder or particle of new energy battery material. Through the measurement of compaction density, it can improve the battery's point capacity, reduce internal resistance, reduce polarization loss, and extend the battery's cycle life, thus improving the battery's utilization rate. The tester is equipped with special compaction density test tooling, professional automatic measurement and control system and test software, which can achieve automatic compaction, Automatic measurement and automatic calculation of test results. Meet the test requirements of new energy industry test standards. It is widely used in new energy batteries and other related industries.
Parameters |
Maximum test force |
300kN |
Accuracy class |
0.5 |
Measuring range of test force |
0.4%~100% F.S (maximum load) |
Test force indication error |
Within ± 0.5% |
Resolution of test force |
1/500000 (the whole range is not divided, and the resolution remains the same) |
Displacement indication error |
Within ± 0.5% |
Force control rate range |
0.02~5%FS/s |
Force control rate accuracy |
When the speed is less than 0.05% FS/s, it is within ± 2% of the set value, When the rate is ≥ 0.05% FS/s, it is within ± 0.5% of the set value |
Displacement control rate range |
0.001~50mm/min |
Displacement control rate accuracy |
Within ± 0.5% of the set value |
Disc diameter of compression fixture |
φ150mm |
Distance between upper and lower pressure plates |
240mm |
Compression die diameter |
φ13mm |
Clear distance between two upright columns |
300mm |
Tags :